Monthly Archives: April 2014
Posted by admin in br2 plumbers boiler repairs, on April 14, 2014
1). Types of Bidet.The two types of Bidet are, The Over Rim Bidet which is similar to a low level style washbasin with hot and cold taps. The Under Rim Bidet which has mixer taps, a spray and remote operated plug. Fitting can be carried out by a professional from BR2 Boiler Repairs .2). Over […]
Posted by admin in br2 plumbers boiler repairs, on April 13, 2014
Backflow, as it is called, is when water which could be contaminated is drawn back into the plumbing system. There are basically two causes of backflow: Back pressure and Back Siphonage. BR2 Plumbers are experienced in backflow.Back pressure is where the water may be caused to flow in the opposite direction. This could occur, for […]
Posted by admin in br2 plumbers boiler repairs, on April 12, 2014
Under the floor heating systems are potentially up to 40 per cent more efficient than conventional systems. Used in with radiators or on its own, it will free up wall space for shelves and cupboards, or for a minimalist look and there are no hot and cold spots as heat is distributed evenly across the […]
Posted by admin in br2 plumbers boiler repairs, on April 6, 2014
When water freezes in a pipe it expand by 10%. This expansion cannot be stopped and as a result the pipe will split. Until the ice melts there is nothing to see but when the ice starts to thaw then a problem emerges as water starts to pour from the split. It is worth bearing […]
Posted by admin in br2 plumbers boiler repairs, on April 4, 2014
A straightforward job to do, if the old pump is defective (which can be diagnosed by BR2 Plumbers with first class knowledge and skills for all plumbing jobs.) Make sure you have the correct replacement booster pump to hand. The electrical supply to the shower must be isolated.1). Isolate the water supply ensuring that it […]
Posted by admin in br2 plumbers boiler repairs, on April 3, 2014
If you are not confident enough to take this job on BR2 Boiler Repairs are fully skilled for any problem. Below is a collection of reasons how and why this might occur:1). Damaged or split siphon or flushing valve.In this particular case the flushing mechanism will need to be replaced in its entirety. This job […]