Broken Flush

Posted by in br2 plumbers boiler repairs, on June 23, 2014

At some stage in the lifetime of your WC it is going to definitely fail to work on at least one visit. This is always very inconvenient. Should this happen to you, you should firstly give it a good thorough visual inspection. Look for anything that is really obvious. It is highly unlikely to be […]

Plumbing that Makes a System

Posted by in br2 plumbers boiler repairs, on May 12, 2014

Tap:Taps can be used to help in guessing the age of a domestic system.Should they not stop dripping, with this constant dripping leaving brown stains on the bath or wash basin, then they should be renewed. Lead Piping:Any older lead pipes you find in your domestic system, need to be renewed as soon as you […]

Macerator Unit

Posted by in br2 plumbers boiler repairs, on May 11, 2014

Macerator Unit.?This piece of equipment is a great bit of kit, and does pretty much the same job as the WC and is very affective. With this unit the pipework is negligible. A BR2 Plumber can fit this unit. The macerator also enables you to choose just where you want it to be fitted unlike […]

Fittings for Plumbers

Posted by in br2 plumbers boiler repairs, on May 10, 2014

There are lots of fittings that are used in plumbing and the problem for anyone considering doing a job themselves is being able to remember their names. Listed below is the names and short descriptions of just some fittings that you may need to use at some point in the future. BR2 Plumbers use different […]

DIY Plumbing Tips

Posted by in br2 plumbers boiler repairs, on May 9, 2014

A). When you are working on hot water pipes, also the pipes on a central heating system, always visually inspect the joint for dryness once the pipes get hot as it is a very normal thing for them to be dry if the water is cold and start to leak if the water is hot. […]

Bending Pipework

Posted by in br2 plumbers boiler repairs, on May 7, 2014

There is a piece of equipment used in plumbing that will allow most pipework to be bent without snapping or crimping. This is called the Pipe Bender. BR2 Plumbers use pipe-bending equipment.The majority of these benders are made to bend various diameter pipes:Small are normally 8,10 and 12mm.Larger are normally 15and 22mm.Should you need to […]

Backflow (basics)

Posted by in br2 plumbers boiler repairs, on April 13, 2014

Backflow, as it is called, is when water which could be contaminated is drawn back into the plumbing system. There are basically two causes of backflow: Back pressure and Back Siphonage. BR2 Plumbers are experienced in backflow.Back pressure is where the water may be caused to flow in the opposite direction. This could occur, for […]

Underfloor heating

Posted by in br2 plumbers boiler repairs, on April 12, 2014

Under the floor heating systems are potentially up to 40 per cent more efficient than conventional systems. Used in with radiators or on its own, it will free up wall space for shelves and cupboards, or for a minimalist look and there are no hot and cold spots as heat is distributed evenly across the […]


NO HIDDEN CHARGES

24 HOUR SERVICE

GAS ENGINEERS